fox 36 performance 2019

State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Our GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise on-the-fly adjustability.

Suspension misuse can cause property damage, SERIOUS INJURY OR DEATH.

EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression.The benefits of EVOL are further enhanced by our new Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.“Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. Fox has lifted the covers on its model year 2019 forks and shocks. If you hear, see, or feel something unusual, stop riding immediately and contact a FOX Authorized Service Center for proper servicing.WARNING: FOX products should be serviced by a qualified bicycle service technician, in accordance with FOX specifications. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes.

This effect can have the unintended consequence of preventing full travel from being achieved. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride.Available optionally is the new Kabolt-X, a lightweight bolt-on floating axle exclusively for the all-new 36 and 38 that not only shaves grams but also increases torsional stiffness via its sleeveless, single-sided pinch bolt design.

Normal operating temperature range for FOX products is 20-140˚F.Depending on variables such as riding style, terrain, bike geometry, etc, you may find that you can only achieve proper sag and ride performance with up to 10psi over or under the recommended value in the suggested starting pressure chart below. 2019 Fox 36 FIT GRIP2 Ride Impressions It all adds up to a bit more than an incremental change—the GRIP2 damper is a vast improvement over the already excellent HSC/LSC damper it replaces. *For those who ride lift-accessed DH, Park, or Extreme Freeride or in extremely wet/muddy or dry/dusty environmental conditions where trail debris is sprayed onto the fork or shock while on the trail, FOX encourages riders to perform maintenance earlier than recommended above as needed. Most of these updated forks and shocks will be available for purchase in the coming … *DO NOT EXCEED THE MAXIMUM NUMBER OF VOLUME SPACERS LISTED ABOVE! Our all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding.Modern frame designs and geometry trends require modern suspension design solutions.

GRIP2 achieves with the twist of a knob what typically requires the time consuming and complicated task of completely disassembling and reassembling the fork.EVOL technology increases negative air spring volume, optimizing small bump sensitivity. Last weekend I did back to back laps on a 2018 36 HCL/LSC and a 2019 FIT GRIP2, and the difference was mind-blowing.

What we sell is what they race.

Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Information regarding converting between 15mm and 20mm axles can be found in the To achieve the best performance from your FOX suspension, adjust the air pressure to attain your proper sag setting. Improperly serviced products can fail, causing the rider to lose control resulting in SERIOUS INJURY OR DEATH. Follow the installation instructions in the video below to properly install your front wheel and enjoy the friction reducing benefits of the floating axle. *DO NOT EXCEED THE MAXIMUM NUMBER OF VOLUME SPACERS LISTED ABOVE! Failure to properly install and adjust your brakes can lead to a loss of control of the bicycle which can result in SERIOUS INJURY OR DEATH.2019 36 FLOAT maximum air pressure is 120psi (8.3 bar)NOTE: Pressure measured at an ambient temperature of 70-75˚F.

If you have any doubt whether or not you can properly service your FOX product, then DO NOT attempt it. With all new design inside-and-out, plus an unmatched combination of smooth performance, tunability, stiffness, and lightweight–With all new design inside-and-out, plus an unmatched combination of smooth performance, tunability, stiffness, and lightweight–Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Use your high and low speed compression adjusters to tune the fork to meet your riding style and terrain.FOX recommends turning adjusters fully clockwise until they come to a  (counter-clockwise) from closed (full clockwise).